Through the combined configuration of rate limits and forwarding mechanisms, you can
control how a device schedules traffic forwarding for users belonging to a user
profile. You can apply QoS to traffic originating from members of user profiles to
determine the prioritization of various categories of traffic. Through these
settings, you can set rate limits and traffic forwarding for each traffic class.
Use the following procedures to configure rate limiting and queuing profiles for
network traffic.
-
Go to .
-
Select an existing map and then
select
, or select 
.
-
Enter a Name for the rate limiting profile.
-
Type the Rate Limit
per Client and use the menu to specify
Mbps or Kbps
-
Configure Traffic
Queue Management Per User per AP.
The
Class Number/Name
is a read-only list of the eight classes.
Note
Extreme Networks devices
control the maximum amount of concurrent, cumulative bandwidth that members
of a user profile can use by enforcing a maximum rate limit.
-
Select from one of two types of
scheduling methods, Strict or Weighted Round
Robin.
Strict forces
devices to immediately forward traffic with strict scheduling. This type of
traffic is not queued.
Devices forward
Weighted Round Robin traffic based on class and
weight of the traffic. Traffic with a higher class and greater weight is
forwarded more quickly.
-
Set the scheduling method that you want the device to use for each traffic
class.
The default scheduling methods
for each class are:
- 7 - Network Control: Strict
- 6 - Voice: Strict
- 5 - Video: WRR
- 4 - Controlled: WRR
- 3 - Excellent Effort: WRR
- 2 - Best Effort 1: WRR
- 0 - Background: WRR
-
Enter a number for the scheduling weight preference.
This is a defined preference for forwarding traffic using WRR scheduling. The
weight that you enter affects the automatically calculated percentage of weight
of each class of traffic in relation to the weights of the other classes.
-
Set a rate limit for each of the eight classes.
Devices allocate bandwidth by
rate limiting traffic based on its class. For each class, you can set a
different rate limit for devices supporting IEEE 802.11a/b/g, 802.11n, and
802.11ac/x. The default rate limits for each class are as follows:
- 7 - Network Control: 512 Kbps for 802.11a/b/g, 20,000 for 802.11n,
40,000 for 802.11ac and 802.11ax.
- 6 - Voice: 512 Kbps for 802.11a/b/g, 20,000 for 802.11n, 40,000 for
802.11ac/x.
- 5 - Video: 10,000 Kbps for 802.11a/b/g, 1,000,000 for 802.11n, 2,000,000
for 802.1ac/ax.
- 4 - Controlled: 54,000 Kbps for 802.11a/b/g, 1,000,000 for 802.11n,
2,000,000 for 802.11ac/ax.
- 3 - Excellent Effort: 54000 Kbps for 802.11a/b/g, 1,000,000 for 802.11n,
2,000,000 for 802.11ac/ax.
- 2 - Best Effort 1: 54000 Kbps for 802.11a/b/g, 1,000,000 for 802.11n,
2,000,000 for 802.11ac/ax.
- 1 - Best Effort 2: 54,000 Kbps for 802.11a/b/g, 1,000,000 for 802.11n,
2,000,000 for 802.11ac/ax.
- 0 - Background: 54,000 Kbps for 802.11a/b/g, 1,0000,00 for 802.11n,
2,000,000 for 802.11ac/ax.
-
Select Save.
